1、壓路機從大方面可分為振動壓路機（碾壓）和靜壓路機（碾壓），振動壓路機又可分為2振幅、6振幅8振幅等，再細化就是根據自重和振幅、激振力等區分型號了。

1. Roller can be divided into vibration roller (rolling) and static pressure roller (rolling) from a large perspective. Vibration roller can be further divided into 2 amplitudes, 6 amplitudes, 8 amplitudes, etc. Further refinement is to distinguish models based on self weight, amplitude, excitation force, etc.

　　靜壓式壓路機：以機械本身的重力作用，適用于靜壓式壓路機。各種壓實作業，使被碾壓層產生變形而密實。又分鋼輪式和輪胎式兩類。

Static pressure roller: Suitable for static pressure rollers due to the gravity of the machinery itself. Various compaction operations cause deformation and compaction of the compacted layer. It is further divided into two categories: steel wheel type and tire type.

　　用于振動碾壓的有單鋼輪和雙鋼輪，但這兩種在不開激振時也可以用于靜碾壓，專用于靜碾壓的就是膠輪壓路機了。

There are single steel wheels and double steel wheels used for vibration compaction, but these two types can also be used for static compaction without excitation. The rubber wheel roller is specifically used for static compaction.

　　2、還有就是根據驅動方式、傳動方式，操作方式等來區分，如全驅或后驅，液壓或機械等等。

2. Another way is to distinguish based on driving mode, transmission mode, operation mode, etc., such as full drive or rear drive, hydraulic or mechanical, etc.

　　3、按碾輪分類：碾輪構造有光碾、槽碾和羊足碾等。光碾應用非常普遍，主要用于路面面層壓實。采用機械或液壓傳動，能集中力量壓實突起部分，壓實平整度高，適于瀝青路面壓實作業。

3. According to the classification of grinding wheels: the construction of grinding wheels includes light rollers, groove rollers, and sheep foot rollers. The application of light rolling is very common, mainly used for compaction of road surface layers. Using mechanical or hydraulic transmission, it can concentrate force to compact protruding parts, with high compaction smoothness, suitable for asphalt pavement compaction operations.

　　4、按輪軸布置有單軸單輪、雙軸雙輪、雙軸三輪和三軸三輪等種。以內燃機為動力，采用機械傳動或液壓傳動。一般前輪轉向，機動性好，后輪驅動。為改善轉向及碾壓性能，宜采用鉸接式轉向結構和全輪驅動。前輪框架和機架鉸接，以減少路面不平時的機身擺動。后輪和機架為剛性聯接。采用液壓操縱、用液壓缸控制轉向。前后碾輪均裝有刮板以清除碾輪上粘結物。還裝有噴水系統，用于壓實瀝青路面時，對碾輪灑水以防瀝青混合料粘附。為增大作用力還可在碾輪內加裝鐵、砂、水等加大壓重。

4. There are various types of wheel axle arrangements, including single axle single wheel, double axle double wheel, double axle three wheel, and three axle three wheel. Powered by an internal combustion engine, using mechanical or hydraulic transmission. Generally front wheel steering, good maneuverability, rear wheel drive. To improve steering and rolling performance, it is advisable to use articulated steering structures and all wheel drive. The front wheel frame and frame are hinged to reduce body sway caused by uneven road surfaces. The rear wheel and frame are rigidly connected. Using hydraulic control and hydraulic cylinders to control steering. Both the front and rear rollers are equipped with scraper plates to remove any adhesive on the rollers. It is also equipped with a water spraying system, which is used to spray water on the roller to prevent the adhesion of the asphalt mixture when compacting the asphalt pavement. To increase the force, iron, sand, water, etc. can be added to the grinding wheel to increase the weight.

以上就是有關：濟南壓路機出租 的介紹，想了解更多的內容請點擊：http://apdetong.cn 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to Jinan roller rental. For more information, please click: http://apdetong.cn We will wholeheartedly provide you with full score service. Welcome to call us!